Diameter: 3" 75 

         Bore Size: 3/8  9.5mm

         Thickness:   1/16 1.6mm

         Intended Use:Stainless Steel (Inox) & Steel

         Maximum RPM: 20000 RPM

         Item Number:WHFE75/1.6

• Extreme cutting capacity (very short cutting times) with very long service life
• Extremely thin for precise, virtually burr and chatter-free cuts (very clean and cool cutting surfaces)
• Very comfortable operation available to protect the user and machine
• Low cutting waste and dust formation
• Low noise development and high break resistance
• Free of iron, chlorine and sulphur (≤ 0.1%)

        Application area

• Stainless steel sheets, non-alloyed stainless steels, alloyed and high-alloy steels, rust- and acid-proof steels, chrome-nickel steels
• Cutting of pipes, ventilation ducts, metal sheets (e.g. containers, sheet metal constructions), piping, rods, steel reinforcements, profiles and rails (in plumbing sector), cable conduits and cable ducts, high-voltage cables, steel cables, composite materials, plastics etc.

        Notice:

• Storage: Dry, at 20°C room temperature
• Work only with appropriate protective clothing
• Always use an appropriate protective hood when performing cutting work
• Work only with undamaged discs
• Do not jam/tilt the discs during cutting — increased risk of breakage!
• Ensure proper contact pressure
• Always clamp cutting discs (straight design) with metal ring towards machine     

      Safety Standards:                                           

      MPA 03909

       EN12413